TMS-SCE-3/32-2.0-S3-4Heat-shrinkable identification markers

  • temperature range: -55 °C to 135 °C
  • size range 0,8 ... 51 mm
  • shrink ratio 3 : 1
  • good resistance to fluids and chemicals
  • thin-walled
  • dot matrix and thermal transfer printable
  • CSA
  • UL file

TMS-SCE markers are designed to meet the wire and identification needs of manufacturers with high-performance requirements. TMS-SCE markers are permanent immediately after printing. Marks remain legible even when exposed to abrasion, aggressive cleaning solvents, and military fuels and oils.

Electrical properties

Dielectric strength 20 kV/mm

Thermal properties

Operating temperature -55 °C  to  135 °C
operating temperature up to (brief) 175 °C

Chemical properties

Fluid resistance hydraulic fluid, fuels, lubricating oil, de-icing fluid, Skydrol® 500
oil-resistant Yes

Physical properties

Tensile strength 10.3 MPa
Ultimate elongation 200.0 %
water absorption 0.5 %

Material

Materials radiation crosslinked polyolefin
Flammability flame retardant
Halogen content not yet reviewed
concentration of silicone contains silicone

Standards

test UL224 flame test UL224 All tube - Flame test

Approvals

CSA LR31929 – 600 V, 125 °C
UL file E35586 – 600 V, 125 °C

General properties

Standard colours of product family
  • yellow (-4)
  • white (-9)
Colour yellow
Brand TE Connectivity Raychem
pinholes yes (spacing 12,7 mm; diameter 4,01 mm)
Markets Aviation, Shipbuilding, Defense, Railway
packaging unit 250

Measurements

Size range of product family 0,8 ... 51 mm
application outer diameter max. 1.9 mm
application outer diameter min. 0.81 mm
inner diameter as supplied 2.36 mm
inner diameter after heating 0.79 mm
sleeve progression 12.7 mm
width 1.14 mm
recovered wall thickness after heating 0.58 mm
total width of carrier 90.18 mm
printable width 48.26 mm
printable height 5.0 mm
printable surfaces both sides
Shrink ratio 3 : 1
divisions [S3] = 3 pre score / 4 pieces